Skip to content

Heat Pump#

The following entities are available if you have a heat pump registered against your account. The following heat pumps are known to be compatible

  • Cosy 6

Humidity Sensor#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_{{SENSOR_CODE}}_humidity

This represents the humidity reported by a sensor (e.g. Cosy Pod) that is associated with a heat pump.

Temperature Sensor#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_{{SENSOR_CODE}}_temperature

This represents the temperature reported by a sensor (e.g. Cosy Pod) that is associated with a heat pump.

Zone#

climate.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_{{ZONE_CODE}}

This can be used to control the target temperature and mode for a given zone (e.g. water or zone 1) linked to your heat pump. It will also display the current temperature linked to the primary sensor for the zone.

The following operation modes are available

  • Heat - This represents as on in the app
  • Off - This represents as off in the app
  • Auto - This represents as auto in the app

In addition, there is the preset of boost, which activates boost mode for the zone for 1 hour. If you require boost to be on for a different amount of time, then you can use the available service.

Note

If you boost and a target temperature is not defined, then a default value will be set. This will be 50 degrees C for water zones and 30 degrees C for all other zones.

Lifetime Seasonal Coefficient of Performance#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_lifetime_scop

This represents the efficiency by the heat pump since commissioning or last reset.

Lifetime Energy Input#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_lifetime_energy_input

This represents the energy/power drawn by the heat pump since commissioning or last reset in kWh.

Lifetime Heat Output#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_lifetime_heat_output

This represents the energy/heat supplied by the heat pump since commissioning or last reset in kWh.

Live Coefficient of Performance#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_live_cop

This represents the instantaneous efficiency of the heat pump.

Note

As this integration uses cloud polling this will inherently have a delay.

Live Power Input#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_live_power_input

This represents the instantaneous energy/power being drawn by the heat pump in kWh.

Note

As this integration uses cloud polling this will inherently have a delay.

Live Heat Output#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_live_heat_output

This represents the instantaneous energy/heat being supplied by heat pump in kWh.

Note

As the integration uses cloud polling this will inherently have a delay.

Live Outdoor Temp#

sensor.octopus_energy_heat_pump_{{HEAT_PUMP_ID}}_live_outdoor_temperature

This represents the current outdoor temperature as observed by the heat pump.

Note

As the integration uses cloud polling this will inherently have a delay.